#!/usr/bin/env perl
# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
#

package xCAT::RemoteShellExp;

#-----------------------------------------------------------------------------

=head1   RemoteShellExp
 Uses perl  Expect to set up ssh passwordless login on the input node list
 Called from  xdsh  <nodelist> -K command
 It works for node and devices ( such as QLogic Switch).
 See man xdsh.
 It works for root and non-root userids.

 Environment Variables input to drive the setup:

   DSH_REMOTE_CMD  set to path to remote shell (ssh)
     root password must agree on all the nodes

   XCAT_ROOT set to root of xCAT install

   DSH_REMOTE_PASSWORD  - to_user password for -s option  required to sendkeys)
			  Note this is obtained in the xdsh client frontend.

   SSH_SETUP_COMMAND - Command to be sent to the IB switch to setup SSH.

   DSH_FROM_USERID_HOME - The home directory of the userid from
                  where the ssh keys will be obtained
                  to send

   DSH_FROM_USERID - The userid from where the ssh keys will be obtained
                  to send
                  to the node,  or generated and then obtained to send to the
                  node.
   DSH_TO_USERID - The userid on the node where the ssh keys will be updated.
   DSH_ENABLE_SSH - Node to node root passwordless ssh will be setup.
   DSH_ZONE_SSHKEYS  - directory containing the zones root .ssh keys

 Usage: remoteshellexp
   [-t node list]  test ssh connection to the node
   [-k] Generates the ssh keys needed , for the user on the MN.
   [-s node list]  copies the ssh keys to the nodes
   optional $timeout = timeout value for the expect.  Usually from the xdsh -t flag
   default timeout is 10 seconds
    exit 0 - good
    exit 1 - abort
    exit 2 - usage error

Examples:
$rc=xCAT::RemoteShellExp->remoteshellexp("k",$callback,$remoteshellcmd,$nodes,$timeout);
$rc=xCAT::RemoteShellExp->remoteshellexp("s",$callback,$remoteshellcmd,$nodes,$timeout);
$rc=xCAT::RemoteShellExp->remoteshellexp("t",$callback,$remoteshellcmd,$nodes,$timeout);

=cut

BEGIN
{
    $::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : '/opt/xcat';
    $::XCATDIR  = $ENV{'XCATDIR'}  ? $ENV{'XCATDIR'}  : '/etc/xcat';
}


use lib "$::XCATROOT/lib/perl";
use xCAT::Utils;
use Getopt::Long;
use xCAT::MsgUtils;
use Expect;
use strict;

#-----------------------------------------------------------------------------
sub remoteshellexp
{
    my ($class, $flag, $callback, $remoteshell, $nodes, $timeout) = @_;
    my $rc = 0;
    $::CALLBACK = $callback;
    if (!($flag))
    {
        my $rsp = {};
        $rsp->{error}->[0] =
          "No flag provide to remoteshellexp.";
        xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 2);
        return 2;
    }

    if (($flag ne "k") && ($flag ne "t") && ($flag ne "s")) {
        my $rsp = {};
        $rsp->{error}->[0] =
          "Invalid  flag  $flag provided.";
        xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
        return 2;

    }
    my $expecttimeout = 10;    # default
    if (defined($timeout)) {   # value supplied
        $expecttimeout = $timeout;
    }

    # for -s flag must have nodes and a $to_userid password
    my $to_user_password;
    if ($ENV{'DSH_REMOTE_PASSWORD'}) {
        $to_user_password = $ENV{'DSH_REMOTE_PASSWORD'};
    }
    if ($flag eq "s") {
        if (!$to_user_password) {
            my $rsp = {};
            $rsp->{error}->[0] =
"The DSH_REMOTE_PASSWORD environment variable has not been set to the user id password on the node which will have their ssh keys updated (ususally root).";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            return 2;
        }
        if (!$nodes) {
            my $rsp = {};
            $rsp->{error}->[0] =
              "No nodes were input to update the user's ssh keys.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            return 2;
        }
    }
    my $ssh_setup_cmd;
    my $from_userid;
    my $to_userid;
    my $home;
    my $remotecopy;

    # if caller input a path to ssh remote command, use it
    if ($ENV{'DSH_REMOTE_CMD'}) {
        $remoteshell = $ENV{'DSH_REMOTE_CMD'};
    } else {
        if (!$remoteshell) {
            $remoteshell = "/usr/bin/ssh";
        }
    }

    # figure out path to scp
    my ($path, $ssh) = split(/ssh/, $remoteshell);
    $remotecopy = $path . "scp";

    # if caller input the ssh setup command (such as for IB Switch)
    if ($ENV{'SSH_SETUP_COMMAND'}) {
        $ssh_setup_cmd = $ENV{'SSH_SETUP_COMMAND'};
    }

    # set User on the Management node that has the ssh keys
    # this id can be a local (non-root) id as well as root
    if ($ENV{'DSH_FROM_USERID'}) {
        $from_userid = $ENV{'DSH_FROM_USERID'};
    } else {
        $from_userid = "root";
    }

    # set User  on the node where we will send the keys
    # this id can be a local id as well as root
    if ($ENV{'DSH_TO_USERID'}) {
        $to_userid = $ENV{'DSH_TO_USERID'};
    } else {
        $to_userid = "root";
    }

    # set User home directory to find the ssh public key to send
    # For non-root ids information may not be in /etc/passwd
    #  but elsewhere like LDAP

    if ($ENV{'DSH_FROM_USERID_HOME'}) {
        $home = $ENV{'DSH_FROM_USERID_HOME'};
    } else {
        $home = xCAT::Utils->getHomeDir($from_userid);
    }

    # This indicates we will generate new ssh keys for the user,
    # if they are not already there
    # unless using zones
    my $key  = "$home/.ssh/id_rsa";
    my $key2 = "$home/.ssh/id_rsa.pub";

    # Check to see if empty
    if (-z $key) {
        my $rsp = {};
        $rsp->{error}->[0] =
          "The $key file is empty. Remove it and rerun the command.";
        xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
        return 1;

    }
    if (-z $key2) {
        my $rsp = {};
        $rsp->{error}->[0] =
          "The $key2 file is empty. Remove it and rerun the command.";
        xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
        return 1;

    }
    if (($flag eq "k") && (!(-e $key)))
    {
        # updating keys and the key file does not exist
        $rc = xCAT::RemoteShellExp->gensshkeys($expecttimeout);
    }

    # send ssh keys to the nodes/devices, to setup passwordless ssh
    if ($flag eq "s")
    {
        if (!($nodes)) {
            my $rsp = {};
            $rsp->{error}->[0] =
              "There are no nodes defined to update the ssh keys.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            return 1;
        }
        if ($ssh_setup_cmd) {    # setup ssh on devices
            $rc = xCAT::RemoteShellExp->senddeviceskeys($remoteshell, $remotecopy, $to_userid, $to_user_password, $home, $ssh_setup_cmd, $nodes, $expecttimeout);
        } else {                 #setup ssh on nodes
            if ($ENV{'DSH_ZONE_SSHKEYS'}) { # if using zones the override the location of the keys
                $home = $ENV{'DSH_ZONE_SSHKEYS'};
            }
            $rc = xCAT::RemoteShellExp->sendnodeskeys($remoteshell, $remotecopy, $to_userid, $to_user_password, $home, $nodes, $expecttimeout);
        }
    }

    # test ssh setup on the node
    if ($flag eq "t")
    {
        $rc = xCAT::RemoteShellExp->testkeys($remoteshell, $to_userid, $nodes, $expecttimeout);
    }
    return $rc;
}

#-----------------------------------------------------------------------------

=head3    gensshkeys
	
      Generates new ssh keys for the input userid on the MN, if they do not
      already exist.  Test for id_rsa key existence.

=cut

#-----------------------------------------------------------------------------

sub gensshkeys

{
    my ($class, $expecttimeout) = @_;
    my $keygen;
    my $timeout = $expecttimeout; # sets Expect default timeout, 0 accepts immediately
    my $keygen_sent = 0;
    my $prompt1     = 'Generating public/private rsa';
    my $prompt2     = 'Enter file.*:';
    my $prompt3     = 'Enter passphrase.*:';
    my $prompt4     = 'Enter same passphrase.*:';
    my $expect_log  = undef;
    my $debug       = 0;
    if ($::VERBOSE)
    {
        $debug = 1;
    }
    $keygen = new Expect;

    #  run /usr/bin/ssh-keygen -t rsa
    # prompt1   = 'Generating public/private rsa';
    # prompt2   = 'Enter file.*:';
    # -re "\r"
    # prompt3   = 'Enter passphrase.*:';
    # -re "\r"
    # prompt4   = 'Enter same passphrase.*:';
    # -re "\r"


    # disable command echoing
    #$keygen->slave->stty(qw(sane -echo));

    #
    # exp_internal(1) sets exp_internal debugging
    # to STDERR.
    #
    #$keygen->exp_internal(1);
    $keygen->exp_internal($debug);

    #
    # log_stdout(0) prevent the program's output from being shown.
    #  turn on if debugging error
    #$keygen->log_stdout(1);
    $keygen->log_stdout($debug);

    # Run the ssh key gen command
    my $spawncmd = "/usr/bin/ssh-keygen -t rsa";
    unless ($keygen->spawn($spawncmd))
    {
        my $rsp = {};
        $rsp->{error}->[0] =
          "Unable to run $spawncmd.";
        xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
        return 1;

    }

    #
    #ssh-keygen prompts starts here
    #

    my @result = $keygen->expect(
        $timeout,
        [
            $prompt1,    # Generating public/private rsa
            sub {
                $keygen->send("\r");
                $keygen->clear_accum();
                $keygen->exp_continue();
            }
        ],
        [
            $prompt2,    # Enter file.*:
            sub {
                $keygen->send("\r");
                $keygen->clear_accum();
                $keygen->exp_continue();
            }
        ],
        [
            $prompt3,    # Enter passphrase.*
            sub {
                $keygen->send("\r");
                $keygen->clear_accum();
                $keygen->exp_continue();
            }
        ],
        [
            $prompt4,    # Enter same passphrase.
            sub {
                $keygen->send("\r");
                $keygen->clear_accum();
                $keygen->exp_continue();
            }
        ]
    );                   # end prompts
    ##########################################
    # Expect error - report and quit
    ##########################################
    if (defined($result[1]))
    {
        my $msg = $result[1];
        $keygen->soft_close();
        if ($msg =~ /status 0/i) {    # no error
            return 0;
        } else {
            my $rsp = {};
            $rsp->{error}->[0] = $msg;
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
            return 1;
        }

    } else {
        $keygen->soft_close();
        return 0;
    }
}

#-----------------------------------------------------------------------------

=head3    testkeys
	
      Test to see if the remoteshell setup worked

=cut

#-----------------------------------------------------------------------------

sub testkeys

{
    my ($class, $remoteshell, $to_userid, $nodes, $expecttimeout) = @_;
    my $testkeys;
    my $timeout       = $expecttimeout;    # sets Expect default timeout
    my $testkeys_sent = 0;
    my $prompt1    = 'Are you sure you want to continue connecting (yes/no)?';
    my $prompt2    = 'ssword:';
    my $prompt3    = 'Permission denied*';
    my $prompt4    = 'test.success';
    my $expect_log = undef;
    my $debug      = 0;
    my $rc = 1;                            # default to error

    if ($::VERBOSE)
    {
        $debug = 1;
    }
    $testkeys = new Expect;

    #  run ssh <node> -l to_userid  echo test.success
    # possible return
    # bad
    ##  Are you sure you want to continue connecting (yes/no)?
    ##  *ssword*
    ## Permission denied.
    # Good
    ## test.success

    # disable command echoing
    #$testkeys->slave->stty(qw(sane -echo));

    #
    # exp_internal(1) sets exp_internal debugging
    # to STDERR.
    #
    #$testkeys->exp_internal(1);
    $testkeys->exp_internal($debug);

    #
    # log_stdout(0) prevent the program's output from being shown.
    #  turn on if debugging error
    #$testkeys->log_stdout(1);
    $testkeys->log_stdout($debug);

    # Run the ssh key gen command
    my $spawncmd = "$remoteshell $nodes -l $to_userid echo test.success";
    unless ($testkeys->spawn($spawncmd))
    {
        my $rsp = {};
        $rsp->{error}->[0] =
          "Unable to run $spawncmd.";
        xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
        return 1;

    }

    #
    #testkeys prompts starts here
    #

    my @result = $testkeys->expect(
        $timeout,
        [
            $prompt1,    # Are you sure you want to ...
            sub {
                $rc = 1;
                $testkeys->hard_close();
            }
        ],
        [
            $prompt2,    # *ssword*
            sub {
                $rc = 1;
                $testkeys->hard_close();
            }
        ],
        [
            $prompt3,    # Permission denied
            sub {
                $rc = 1;
                $testkeys->hard_close();
            }
        ],
        [
            $prompt4,    # test.success
            sub {
                $rc = 0;
            }
        ]
    );                   # end prompts
    ##########################################
    # Expect error - report and quit
    ##########################################
    if (defined($result[1]))
    {
        my $msg = $result[1];
        $testkeys->soft_close();
        if ($msg =~ /status 0/i) {    # no error
            return 0;
        } else {
            my $rsp = {};
            $rsp->{error}->[0] = "Testing the ssh connection to $nodes failed:".$msg;
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
            return 1;
        }

    } else {
        $testkeys->soft_close();
        return $rc;
    }
}

#-------------------------------------------------------------------------------

=head3    sendnodeskeys
	
      Setup the ssh keys on the nodes

=cut

#-----------------------------------------------------------------------------

sub sendnodeskeys

{
    my ($class, $remoteshell, $remotecopy, $to_userid, $to_userpassword, $home, $nodes, $expecttimeout) = @_;
    my $sendkeys;
    my $timeout = $expecttimeout; # sets Expect default timeout, 0 accepts immediately
    my $sendkeys_sent = 0;
    my $prompt1    = 'Are you sure you want to continue connecting (yes/no)?';
    my $prompt2    = 'ssword:';
    my $prompt3    = 'Permission denied*';
    my $expect_log = undef;
    my $debug      = 0;
    my $rc         = 0;
    if ($::VERBOSE)
    {
        $debug = 1;
    }

    # For each node
    #  make a temporary directory on the node
    #  run scp <nodename> -l <to user> /bin/mkdir -p /tmp/$to_userid/.ssh
    #  xdsh has built an authorized_keys file for the node
    #  in $HOME/.ssh/tmp/authorized_keys
    #  copy to the node to the temp directory
    #  scp $HOME/.ssh/tmp/authorized_keys to_userid@<node>:/tmp/$to_userid/.ssh
    #  scp $HOME/.ssh/id_rsa.pub to_userid@<node>:/tmp/$to_userid/.ssh
    #  Note if using zones,  the keys do not come from ~/.ssh but from the
    #  zone table, sshkeydir attribute.  For zones the userid is always root
    #  If you are going to enable ssh to ssh between nodes, then
    #  scp $HOME/.ssh/id_rsa to that temp directory on the node
    #  copy the script $HOME/.ssh/copy.sh to the node, it will do the
    #  the work of setting up the user's ssh keys  and clean up
    #  ssh (run)  copy.sh on the node

    my @nodelist = split(/,/, $nodes);
    foreach my $node (@nodelist) {
        $sendkeys = new Expect;

        # disable command echoing
        #$sendkeys->slave->stty(qw(sane -echo));
        #
        # exp_internal(1) sets exp_internal debugging
        # to STDERR.
        #
        #$sendkeys->exp_internal(1);
        $sendkeys->exp_internal($debug);
        #
        # log_stdout(0) prevent the program's output from being shown.
        #  turn on if debugging error
        #$sendkeys->log_stdout(1);
        $sendkeys->log_stdout($debug);

        # command to make the temp directory on the node
        my $spawnmkdir =
          "$remoteshell -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null $node -l $to_userid  /bin/mkdir -p /tmp/$to_userid/.ssh";

        # command to copy the needed files to the node

        # send mkdir command
        unless ($sendkeys->spawn($spawnmkdir))
        {
            my $rsp = {};
            $rsp->{error}->[0] =
              "Unable to run $spawnmkdir on $node";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            next;
        }

        #
        #mkdir prompts starts here
        #

        my @result = $sendkeys->expect(
            $timeout,
            [
                $prompt1,    # Are you sure you want to ...
                sub {
                    $sendkeys->send("yes\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt2,    # *ssword*
                sub {
                    $sendkeys->send("$to_userpassword\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt3,    # Permission denied
                sub {
                    $rc = 1;
                    $sendkeys->hard_close();
                }
            ],
        );                   # end prompts
        ##########################################
        # Expect error - report
        ##########################################
        if($rc==1){
            my $rsp = {};
            $rsp->{error}->[0] = "Permission denied, please make sure the user $to_userid has been created on the node $node and the input password is right\n";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
        }
        if (defined($result[1]))
        {
            my $msg = $result[1];
            if ($msg =~ /status 0/i) {    # no error
                $rc = 0;
            } else {
                if ($msg =~ /2:EOF/i) {    # no error
                    $rc = 0;
                } else {
                    my $rsp = {};
                    $rsp->{error}->[0] = "Failed to run \"/bin/mkdir -p /tmp/$to_userid/.ssh\" on $node: $msg";
                    xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
                    $rc = 1;
                }
            }
        }
        $sendkeys->soft_close();

        #
        #copy files prompts starts here
        #

        $sendkeys = new Expect;

        # disable command echoing
        #$sendkeys->slave->stty(qw(sane -echo));
        #
        # exp_internal(1) sets exp_internal debugging
        # to STDERR.
        #
        #$sendkeys->exp_internal(1);
        $sendkeys->exp_internal($debug);
        #
        # log_stdout(0) prevent the program's output from being shown.
        #  turn on if debugging error
        #$sendkeys->log_stdout(1);
        $sendkeys->log_stdout($debug);

        my $spawncopyfiles;
        if ($ENV{'DSH_ENABLE_SSH'}) {    # we will enable node to node ssh
            $spawncopyfiles =
"$remotecopy -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null  $home/.ssh/id_rsa $home/.ssh/id_rsa.pub $home/.ssh/copy.sh $home/.ssh/tmp/authorized_keys $to_userid\@$node:/tmp/$to_userid/.ssh";

        } else {    # no node to node ssh ( don't send private key)
            $spawncopyfiles =
"$remotecopy -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null $home/.ssh/id_rsa.pub $home/.ssh/copy.sh $home/.ssh/tmp/authorized_keys $to_userid\@$node:/tmp/$to_userid/.ssh";
        }

        # send copy command
        unless ($sendkeys->spawn($spawncopyfiles))
        {
            my $rsp = {};
            $rsp->{error}->[0] =
              "Unable to run $spawncopyfiles on $node.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            next;
        }

        @result = $sendkeys->expect(
            $timeout,
            [
                $prompt1,    # Are you sure you want to ...
                sub {
                    $sendkeys->send("yes\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt2,    # *ssword*
                sub {
                    $sendkeys->send("$to_userpassword\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt3,    # Permission denied
                sub {
                    $rc = 1;
                    $sendkeys->hard_close();

                }
            ],
        );                   # end prompts
        ##########################################
        # Expect error - report
        ##########################################
        if (defined($result[1]))
        {
            my $msg = $result[1];
            if ($msg =~ /status 0/i) {    # no error
                $rc = 0;
            } else {
                if ($msg =~ /2:EOF/i) {    # no error
                    $rc = 0;
                } else {
                    my $rsp = {};
                    $rsp->{error}->[0] = "Failed to copy ssh credentials and helper script to $node: $msg";
                    xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
                    $rc = 1;
                }
            }
        }
        $sendkeys->soft_close();

        #
        # ssh to the node to run  the copy.sh to setup the keys starts here
        #
        $sendkeys = new Expect;

        # disable command echoing
        #$sendkeys->slave->stty(qw(sane -echo));
        #
        # exp_internal(1) sets exp_internal debugging
        # to STDERR.
        #
        #$sendkeys->exp_internal(1);
        $sendkeys->exp_internal($debug);
        #
        # log_stdout(0) prevent the program's output from being shown.
        #  turn on if debugging error
        #$sendkeys->log_stdout(1);
        $sendkeys->log_stdout($debug);

        # command to run copy.sh
        my $spawnruncopy =
          "$remoteshell -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null  $node -l $to_userid /tmp/$to_userid/.ssh/copy.sh $to_userid";

        # send mkdir command
        unless ($sendkeys->spawn($spawnruncopy))
        {
            my $rsp = {};
            $rsp->{error}->[0] =
              "Unable to run $spawnruncopy.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            next;    # go to next node

        }

        #
        #run copy.sh prompts starts here
        #

        @result = $sendkeys->expect(
            $timeout,
            [
                $prompt1,    # Are you sure you want to ...
                sub {
                    $sendkeys->send("yes\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt2,    # *ssword*
                sub {
                    $sendkeys->send("$to_userpassword\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt3,    # Permission denied
                sub {
                    $rc = 1;
                    $sendkeys->hard_close();
                }
            ],
        );                   # end prompts
        ##########################################
        # Expect error - report
        ##########################################
        if (defined($result[1]))
        {
            my $msg = $result[1];
            if ($msg =~ /status 0/i) {    # no error
                $rc = 0;
            } else {
                if ($msg =~ /2:EOF/i) {    # no error
                    $rc = 0;
                } else {
                    my $rsp = {};
                    $rsp->{error}->[0] = "Failed to apply the ssh keys on $node:$msg";
                    xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
                    $rc = 1;
                }
            }
        }
        $sendkeys->soft_close();


    }    # end foreach node
    return $rc;
}

#-------------------------------------------------------------------------------

=head3    senddeviceskeys
	
      Setup the ssh keys on the switches

=cut

#-----------------------------------------------------------------------------

sub senddeviceskeys

{
    my ($class, $remoteshell, $remotecopy, $to_userid, $to_userpassword, $home, $ssh_setup_cmd, $nodes, $expecttimeout) = @_;
    my $sendkeys;
    my $timeout = $expecttimeout; # sets Expect default timeout, 0 accepts immediately
    my $sendkeys_sent = 0;
    my $prompt1    = 'Are you sure you want to continue connecting (yes/no)?';
    my $prompt2    = 'ssword:';
    my $prompt3    = 'Permission denied*';
    my $expect_log = undef;
    my $debug      = 0;
    my $rc         = 0;
    if ($::VERBOSE)
    {
        $debug = 1;
    }

    # quote the setup command and key "sshKey add \"<key\""
    my $setupcmd = "\"";
    $setupcmd .= $ssh_setup_cmd;
    $setupcmd .= " ";

    # get the public key
    my $key = "\\";
    $key .= "\"";
    $key .= `cat $home/.ssh/tmp/authorized_keys  `;
    chop($key);
    $key .= "\\";
    $key .= "\"";

    # add to the command
    $setupcmd .= $key;
    $setupcmd .= "\"";

    # Special case for vios
    if ($ENV{DEVICETYPE} eq 'vios') {
        $setupcmd = "\"echo $key | tee -a ~/.ssh/authorized_keys2\"";
    }

    # For each input device
    my @nodelist = split(/,/, $nodes);
    foreach my $node (@nodelist) {
        #
        # ssh to the node to run  the copy.sh to setup the keys starts here
        #
        $sendkeys = new Expect;

        # disable command echoing
        #$sendkeys->slave->stty(qw(sane -echo));
        #
        # exp_internal(1) sets exp_internal debugging
        # to STDERR.
        #
        #$sendkeys->exp_internal(1);
        $sendkeys->exp_internal($debug);
        #
        # log_stdout(0) prevent the program's output from being shown.
        #  turn on if debugging error
        #$sendkeys->log_stdout(1);
        $sendkeys->log_stdout($debug);

        # command to send key to the device
        # sshKey add "key"
        my $spawnaddkey =
          "$remoteshell $node -l $to_userid $setupcmd";

        # send mkdir command
        unless ($sendkeys->spawn($spawnaddkey))
        {
            my $rsp = {};
            $rsp->{error}->[0] =
              "Unable to run $spawnaddkey.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            next;    # go to next node

        }

        #
        #run copy.sh prompts starts here
        #

        my @result = $sendkeys->expect(
            $timeout,
            [
                $prompt1,    # Are you sure you want to ...
                sub {
                    $sendkeys->send("yes\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt2,    # *ssword*
                sub {
                    $sendkeys->send("$to_userpassword\r");
                    $sendkeys->clear_accum();
                    $sendkeys->exp_continue();
                }
            ],
            [
                $prompt3,    # Permission denied
                sub {
                    $rc = 1;
                    $sendkeys->soft_close();
                    next;    # go to next node
                }
            ],
        );                   # end prompts
        ##########################################
        # Expect error - report
        ##########################################
        if (defined($result[1]))
        {
            my $msg = $result[1];
            if ($msg =~ /status 0/i) {    # no error
                $rc = 0;
            } else {
                my $rsp = {};
                $rsp->{error}->[0] = "$node has error,$msg";
                xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
                $rc = 1;
                next;                     # go to next node
            }
        }
        $sendkeys->soft_close();
    }    # end foreach node
    return $rc;
}
1;